[BC] Gates Transmitter Parts Needed!!

[BOYDSIRBOYD at aol.com]

In a message dated 4/19/2008 3:24:48 A.M. Eastern Daylight Time,  
dynotherm at earthlink.net writes:

PHIL,
 
funny you mention that, about putting the 807's vertically. that mod was  
never approved by GATES.
so i have to make my own i guess.
 
bill



-----Original Message-----
>From: Alan Alsobrook  <radiotech at bellsouth.net>
>Subject: Re: [BC] Gates Transmitter  Parts Needed!!


If you must run a BC-1G as a full time main you  might strongly consider 
changing 
the driver board orientations from  vertical to horizontal.

Two pair of angle brackets, two eight inch  diameter condenser fans, and the
807's will have a chance IF you can find  some NOS JAN 807's.

Remember that the RF driver is the weak point of  the BC-1T/G design. It 
needs 
every advantage it can get.

Phil  Alexander, CSRE,  AMD


_______________________________________________

The  BROADCAST [BC] list is sponsored by SystemsStore - Your Premium
Supplier Of  Components To Build and Maintain A Technical  Infrastructure
www.SystemsStore.com       Tel:  407-656-3719     Sales at SystemsStore.com





**************Need a new ride? Check out the largest site for U.S. used car 
listings at AOL Autos.      
(http://autos.aol.com/used?NCID=aolcmp00300000002851)