[BC] RG-8

[Dana Puopolo]

I used the center of RG-8U for an emergency filament lead on an IOT tube in a
UHF transmitter. The plate sat at zero volts and the filament was pulled down
to minus 33 kV!  Worked fine until I could get replacement leads.

-D

-----Original Message-----
 >about 4 inches of polyethylene before the shield. From
 >a UL ampacity perspective, the inside wire is 11 gauge
 >and will therefore handle 25 amperes, MUCH more than
 >you would like!  That is 31,250 watts!