[BC] trouble with an old BC-1G need advice

[Alan Alsobrook]

Unfortunately, it sounds like the repairs have already cost about 50% or 
more, than a replacement would have. Add that to the decrease in 
operating cost and a replacement would have cost less in a year. That is 
of course after making sure their was a good 50j0 load at the TX.

dynotherm at earthlink.net wrote:
  > Good drive is 150 ~ 175 mA, the only problem you probably
> can't get it in a 1T or 1G because the 807's won't do it
> like the 813 did in earlier models like the 1F. Tune it up
> for as much as you can get and still keep the 807's alive 
> for 6 months (or a year if you are very lucky).

-- 
Alan Alsobrook CSRE AMD CBNT
St. Augustine Fl. 32086 904-829-8885
aalso at Bellsouth.net