[BC] Starguide Channel Swap

[Golchert, Michael A.]

	Ok, ok, you can stop laughing.....I was trying to say, in the
second paragraph, that things happen at the most inconvenient time...not
exactly the way it came through the M'$oft spell checker.

	Going back to lurking with lots of egg on my face....TGIF.


Michael A. Golchert
Clear Channel Radio


-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Golchert, Michael
A.
Sent: Friday, October 19, 2007 12:57 PM
To: Broadcasters' Mailing List
Subject: RE: [BC] Starguide Channel Swap


	A suggestion to all when you get these kind of requests.  Rather
than re-wire the existing connector, build an "adapter" that would flip
the channels using DIN plugs (male/female)  Make certain that you use
hoods & connecting screws and LABEL both ends of the "adapter".
	We all know that at the most incontinent time, we'll have to
"un-do" the re-wiring.  With an adapter, there is less time with the
soldering iron in the shop and more time being the "hero" for the staff.
	You could go as far as having several adapters pre-made... for
example L into mono, R into Mono, L/R swap.

	Just a thought...


Michael A. Golchert
Clear Channel Radio


-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Phil Longenecker
Sent: Friday, October 19, 2007 8:28 AM
To: broadcast at radiolists.net
Subject: Re: [BC] Starguide Channel Swap

If you have the Starguide located with your automation system, or have a
serial data link between the two, you may be able to have the automation
system send the command (with a log entry) to change the audio outputs
on the card. Our SS32 will do that.

The BT 32/64 controller is nice to use, also.

Phil Longenecker, DoE
Milwaukee Radio Group
414.349.4130 

This email message, including attachments, may contain confidential
and/or privileged material specific to Saga Communications, Inc.  Any
unauthorized use, disclosure or distribution is prohibited.  If you have
received this in error, please delete it.
_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Test Gear-Tools-Lots More + Now Barix too!
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com

_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Test Gear-Tools-Lots More + Now Barix too!
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com