[BC] Mic flags/signage needed

[Broadcast List]

The RE-20 REALLY needs a shock mount, and EV makes one specifically  
for the mic.  It is a bit "U" shaped do-dad that has a rubber spider  
web that isolates the part that the mic mounts within.

This "U" gives one a LOT of real estate for logos.  I always had a  
engraving shop in my list of vendors to do this type of work, and to  
engrave switch caps and other things which need quickly readable  
identifiers.

The SM-7  is a BIT more problematic, but by using hose clamps and  
maybe even some small Round Member Adapters one can build up a  
surface to which logo plates (mic flags) could be attached.

Then again, RTV can make anything stick to anything.

--chip

On Oct 2, 2007, at 12:54 PM, broadcast-request at radiolists.net wrote:

> Message: 31
> Date: Tue, 02 Oct 2007 11:45:11 -0500
> From: Scott Todd <stodd at kkms.com>
> Subject: [BC] Mic flags/signage needed
> To: broadcast at radiolists.net
> Message-ID: <47027597.2070009 at kkms.com>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> What would you folks recommend for mic flags when it comes to RE-20  
> and
> SM-7 mics?  Seems like the stuff I see advertised is all for hand-held
> types.  A few of our mic arms have a long enough end which could  
> allow a
> hand-mic type to be slipped over that portion, but not all of  
> them.  But
> the SM-7s have the connectors placed where it would interfere with  
> them
> even when they are long enough.
>
> Scott Todd