[BC] Designing a four station RF STL system

[Robert Meuser]

Bernie

You can not do that with typical licensed links.  He did say licensed.

R


Bernie Courtney wrote:

> Assuming you are proficient enough with IP routing (or could find
> somebody who is), you'd probably be better off trying to just build an
> IP LAN from each of the tx sites to your 12 story building, then
> combine those on your big pipe to go back to your studio, rather then
> go from your studio to this building IP then convert to some other
> form of audio for the 'last mile'- just keep it IP all the way and
> eliminate any unnecessary gear in the middle.
>
> bern
>
>> > jeff at rfproof.com wrote:
>> > > Request to the brain trust:
>> > >
>> > > Oh gurus,
>> > >
>> > > We are designing an RF STL system for four stations. The studios 
>> are in
>> a valley. The present STL paths are Intraplex based and 
>> interconnected by
>> T1s. Backup is by Zephyrs interconnected by ISDN. One backup is a 
>> pair of
>> 15kHz EQ'd lines.
>> > >
>> > > We are nearing a contract for the rooftop of a nearby 12 story 
>> building
>> with line-of-sight to the three sites where the four transmitting 
>> plants are
>> located. The rooftop has six penetrating mounts in place plus coax to an
>> equipment room from a previous installation.
>> > >
>> > > Our initial plan is to utilize a BE Big Pipe from the roof of the
>> studios to the roof of the 12 story building carrying all four signals
>> multiplexed - analog, HD, and IP each.
>> > >
>
>
>
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and 
> More! www.SystemsStore.com       Tel: 407-656-3719    
> Sales at SystemsStore.com
>