[BC] Barix Products

[Dana Puopolo]

If they came with 9 volt DC wall warts, throw them in the junk bin and use 12
volt ones instead.  Barix units like to see 12 volts minimum. Running volyages
less then 12 volts causes them to become unstable and prone to lock up. I
notified Barix of this some time ago, but a bunch of the units already in the
pipeline were shipped with the 9 volt ones.

-D

------ Original Message ------
Received: Thu, 22 Mar 2007 10:43:29 AM EDT
From: "Steve Ordinetz" <hykker at grolen.com>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Subject: RE: [BC] Barix Products

Dana Puopolo wrote...

> Barix units need to be powered down for a few seconds about every four
> weeks,
> otherwise they will lock up. We've had several do so recently, within days
> of
> each other.
>

How do you get them to go that long?  I have to do mine on average of once
a week.  Tx end seems fine, it's the rx end that seems to lock up.  All
LED indications look normal.
_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com