[BC] Need STL

[Glen Kippel]

On 3/5/07, Scott Cason <scott at lagrange-com.com> wrote:
If the loop is local (same CO end to end), it can't be more than
$200/mo.  That's a LOT of months to pay for a complete STL system.  And
many many more if the station is an AM DA and you need to mount the RX
dish on one of the active towers..read..partial proof.

-------------

My calculator sez if you spend $6000 for an STL, it would pay for itself in
30 months at $200/mo. and after that it's all savings.  Active tower?  Sink
a wooden pole next to the transmitter building and you don't need an
isocoupler, etc.  That's assuming you don't need to get the dish 200' in the
air for Fresnel-zone clearance, of course.