[BC] Assistance With A PI Network Calculation

[Jim Tonne]

Tom wrote:

>  Wonder if someone could give me the approximate
> values of the input and output capacitors for the PI network
> at 3.8 MHz?  The 1625s will have about 700 volts on the 
> plates with 300 MA which is a plate load of 2333 ohms.  
> The output of the PI network will of course feed 50 ohms.

Go here:
http://tonnesoftware.com/piel.html
That program can not only design  *but also analyze*
your network.

- JimT