[BC] Re: RS232 switching gizmo wanted

[Ron Cole]

Well you could use a Serial Smart Switch or an Ethernet Serial Server.
I have used the an Ethernet Serial Servers with good results for this 
type of application.

Try B&B Electronics at : http://www.bb-elec.com


Ron








Xmitters at aol.com wrote:
> Hello:
>
> With Content Depot and all kinds of other neat stuff I have at my station 
> that is RS232 programmable, I would like to find an RS232 fanout swwitch (maybe a 
> RS232 port router would be a better term) that would allow me to remotely 
> connect to a dozen or more RS232 programmable devices. Ideally, there would be 
> one computer at my studio connected to this device, that could be communicated 
> with over PCAnywhere or similar software from a remote location. I could then 
> remotely program my ABR202 demods, Stream Decoders, and anything else with an 
> RS232 port on it :-)
>
> What's out there? I am not plucky with regard to O/S. I can run anything from 
> DOS 6.22 to Win XP/SP2.
>
>
> Jeff Glass, BSEE CSRE 
> Chief Engineer
> WNIU WNIJ
> Northern Illinois University
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>
>