[BC] #10 copper

[Kevin C. Kidd, CSRE]

Seal Wire is certainly cheap but it is also very poor 
quality.  We have used it a few times and found that the 
wire itself is so abrasive that it wears out everything it 
slides across on the plow.

We normally get 100,000-150,000 feet thru a down tube with 
our normal suppliers wire.  We ruined 2 down tubes plowing 
45,000 of wire last September.  It also wore a serious 
groove thru the threader that has had 1,000,0000+ ft of 
wire ran thru it without damage.

But is quite a bit cheaper.  It saved the client about 
$1200 (abt 20%) but cost me a day working on the plow on 
site.

I can supply the wire if you want to contact me off 
list.  Heck...  We will do the whole thing.

Good Luck,


At 01:32 AM 2/12/2007, Milton R. Holladay Jr. wrote
Seal Metals, Shelby, NC
M
----- Original Message -----
From: "Andrew Skotdal" <andrew.skotdal at krko.com>
To: <broadcast at radiolists.net>
Sent: Monday, February 12, 2007 2:18 AM
Subject: [BC] #10 copper

-- 

Kevin Kidd, CSRE
WD4RAT
mailto:kkidd at kkbc.com

KK BROADCAST ENGINEERING
http://www.kkbc.com

AM GROUND SYSTEMS CO.
http://www.amgroundsystems.com

51 Ridge Ln
Lawrenceburg, TN 38464
Local:        931-766-2999
Nation Wide:  877-766-2999
FAX:          931-766-3974