[BC] console lamps

[Rex Hyum Lee]

Thanks again Ron:
I saw those as well, need neg.....
This is an older board and having tried in the past to find
A neg. center contact, according to Dale De La
 Point the newer boards are wired with a positive on the center contact.
This is the first source to accomodate that need i've found.
    _Rx.     o=iii=<()

----- Original Message ----- 
From: "Ronald J. Dot'o Sr." <ron.doto at comcast.net>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Monday, April 23, 2007 8:02 PM
Subject: Re: [BC] console lamps


>I saw that and went to that site and found two cross references for the 386 
>for less than $7.00 ea.  They have a positive center contact and I'm not 
>sure what the polarity is on the 1200 switches but if it's pos you can save 
>a few bucks seeing as the min order is 10 ea.  Most of the links I clicked, 
>including the one in this email, came up "cannot display page" so I have a 
>problem at this end I guess.  Anyway the subs I found are: Pale White; 
>G206-CW6-14V-BP and Super Incandescent White; GF200-01W-0014B.
>
> Ron D
>
>
> ----- Original Message ----- 
> From: "Rex Hyum Lee" <rex at verticalradio.org>
> To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
> Sent: Monday, April 23, 2007 17:59
> Subject: Re: [BC] console lamps
>
>
> Thanks Ron:
> Brian Urban sent me to LEDTronics.com
> and I found the 386 bulb replacment in a bi-polar
> package at http://www.ledtronics.com/ds/GF200/default.asp
> PN. GF200-2IW-014B        $11.40ea
>
>        12/14V                   B = BiPolar DC
>
> or for anyone tired of replacing 386s, Getting harder to find
> locally...
>    _Rx.
>
> GF200-2IW-014B    $11.40ea  12/14V   B = BiPolar DC
>
> ----- Original Message ----- 
> From: "Ronald J. Dot'o Sr." <ron.doto at comcast.net>
> To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
> Sent: Monday, April 23, 2007 4:10 PM
> Subject: Re: [BC] console lamps
>
>
>> Sounds like a great idea but I haven't seen any LED bulbs in the same 
>> size
>> and configuration as the small bulbs.  You might try calling Dale De La
>> Point @ Arrakis, 970-461-0730, ext. 316 and ask him.  He's pretty sharp 
>> on
>> the 1200 series and may know of a replacement.
>>
>> Ron D
>>
>> ----- Original Message ----- 
>> From: "Rex Hyum Lee" <rex at verticalradio.org>
>> To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
>> Sent: Monday, April 23, 2007 07:59
>> Subject: [BC] console lamps
>>
>>
>> I am looking for someone who has converted an
>> Arrakis 1200 _10, channel on/off switch to LED lamps!
>> where do you find the neg. base leds or what do I have
>> to do to convert the board?
>>
>> Thanks, Rex.
>> o=iii=<()
>>
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>