[BC] Valley 401 schema

[Glen Kippel]

That is definitely good news.  I am quite impressed with the mic processor,
and have also used a pair of 440 compressor/limiter/expander/de-essers in
the on-air chain.  Loved them.

On 4/7/07, Jerry Mathis <thebeaver32 at gmail.com> wrote:
>
> Here's news and contact info. HTH.
>
>
>
> [image: Default] *Pmi Audio Acquires Valley Audio*
> ------------------------------
> We are pleased to announce we have acquired the assets of the original
> Valley People aka Valley Audio company. Valley Audio has been a well
> respected pro audio company since the 1970's with years of pro audio
> experience, and was a leader in VCA technology for many years.
>
> I can't think of a hit record in the 1970's, 80's, and 90's that did not
> have Valley Audio on it. Unfortunately, the company went through some bad
> years with the selling of the company a few times, and then basically
> sitting idle for many years under the ownership of Galaxy Audio.
>
> Well, PMI has purchased the company, and we are now in the process of
> sorting it all out, and will introduce the company again at the end of
> this
> year with some familiar models, and some new things as well. We are
> confident we can bring Valley Audio to market with the same quality and
> flexibility at an affordable price point.
>
> To me, the Keypex, Gain Brain, MaxiQ, Dynamite and the 401 vocal processor
> are as effective in today's market as they were in years past. So look for
> more information on this in the coming months, and we will do our best to
> get this gear out by AES.
>
> Any questions or comments are most welcomed....
> __________________
> Alan Hyatt
> PMI Audio Group
> alan at pmiaudio.com
> toll free: 877-563-6335
>
>
>
> JM
>
>
>
>
> On 4/7/07, Tom Taggart <tpt at eurekanet.com> wrote:
> >
> > They wanted a mike processor for a single 4 hour show.
> > So I found one of these used.  Playing with it I think I'll feed it high
> > level rather than feed it directly off the mike (Auditronics 2500
> > console--you can pull high level audio post preamp pre-fader)
> >
> > Now the $64 dollar question: does anyone have a schematic for this
> > critter?  Or an on-line source?  Not that it looks like it can be
> fixed--I
> > think the circuit board sits on sticky-tape in the case.
> > --
> > _______________________________________________
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>