[BC] Gates 5

[BOYDSIRBOYD@aol.com]

In a message dated 4/10/2007 4:10:15 P.M. Eastern Daylight Time,  
wkbceng at charter.net writes:

have had  the meter scales warp out on a SX and Gates series transmitters to 
the point  that the pointer stuck on them.  One meter showed 500 watts after 
the  power had been disconnected to the transmitter.  Tapping on the meter  
face showed the problem.  The meter scale had come unglued from the base  in both 
instances.



well that's one problem i've seen, also the lead in wires would move and  
catch the weighted end of the meter movement,that would keep the movement  from 
doing a complete side to side swing.  i've repaired the single  wire tension 
meter movement also. those are hard.
 
bill



************************************** See what's free at http://www.aol.com.