[BC] Re: No more remotes

[Chris Oradat]

We had DBX Type 2 encoding on all marti shots.  That, along with the
occasional 100W shot really helped.  Trucks had dual 10 db antennas, studio
had 13 db antennas, and tower sites had 15' omni poles (dunno actual gain).
No show was put on the air with less than '100%', about 100 mV.  In a couple
of instances, we wound up two hopping (eight freqs helped) or running the
signal through an EQ to make it sound better (not much you can do about the
hiss)

--
Chris Oradat

-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Xmitters at aol.com
Sent: Wednesday, April 04, 2007 3:53 PM
To: broadcast at radiolists.net
Subject: [BC] Re: No more remotes


In a message dated 4/4/07 2:43:27 PM Central Daylight Time, 
broadcast-request at radiolists.net writes:

<< I still keep hearing..."Get out into the community...get those banners
up!  
 Shake hands. I say Hogwash. Program your station correctly with good
content  
 and you'll win. End of discussion. If there's a cash flow problem then have

management fix it by upping the rates or getting the sales people off their
b
utts.    Now, do you really want me to tell you what I think? :)    Steve
>> 
 Steve,  there is validity to getting out there, rubbing elbows with the
public
 and hanging banners. You would be hard pressed to convince me that these
thing
s don't help with the image of the station.   Have the studio announcer push
th
e fact that the remote crew is at site "A" and why you should go there. Then
gi
ve the "remote" announcer a PA mic. Don't crap up your air signal with some
noi
sy assed marti signal.      Jeff Glass Northern Illinois University  DEC
6180 W
in NT 4.0 SP6A AOL 5.0
**************************************
 See what's free at http://www.aol.com.
_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com