[BC] Simple question

[Paul B. Walker, Jr.]

With my BTA1M Sometimes I leave the filaments on, sometimes I don't.

If I turn the filaments off, come sunrise.. I turn them on for 5 or 10
mintues then turn on the PA/RF switch.. and have never had a problem...

Paul B. Walker, Jr.
www.walkerbroadcasting.com
www.wabv1590.com
www.myspace.com/walkerbroadcasting



On 4/2/07, Mail Radiolanes Account <mail at radiolanes.com> wrote:
>
> Yep or Kaboom!  Back when...I had them leave the filaments on overnight
> before the solid state replacements came into play. But this was a
> daytimer...and main not standby TX
>
> Lane
> ----- Original Message -----
> From: "Ron Youvan" <ka4inm at tampabay.rr.com>
> To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
> Sent: Monday, April 02, 2007 6:24 PM
> Subject: Re: [BC] Simple question
>
>
> > > Thankfully, the 30 second warm-up is only when the transmitter is fist
> > > turned on.  After the 8008's have time to warm up all can be switched
> > > quickly.
> >
> >    Remember on cold mornings or nights give them four times that, to
> warm
> up.
> > --
> >     Ron  KA4INM - My Florida property tax is 7 times what it was
> >                   3 years ago with no change on my part. OUCH!
> > _______________________________________________
> >
> > The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> > Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> > www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
> >
>
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>
>


-- 
Paul B. Walker, Jr.
www.walkerbroadcasting.com
walkerbroadcasting at gmail.com