[BC] OIB-3 Connectors
Mark Humphrey
mark3xy at gmail.com
Sat Nov 27 08:15:08 CST 2010
A cheap way to make a BNC adapter for your OIB: If you can find an
old style BNC-to-dual banana plug adapter (the type with the hot
banana on the same axis as the BNC and the grounded banana offset on a
metal strip), you'll find that the hot banana makes a good fit with
the input connector on the bridge. Just remove the grounded banana
and attach that end of the adapter to one of the connector mounting
screws with a short piece of braid, just long enough that you can pull
it off when using the jumper cables.
I wouldn't run much power through one of these, but it will do the
trick if you need to connect a signal generator to the bridge.
Mark
On Fri, Nov 26, 2010 at 9:53 PM, <donroden at hiwaay.net> wrote:
> I would love to have a couple with the big DIN connector or Binding posts
> on the output/input.
>
> Don R
More information about the Broadcast
mailing list