[BC] Flipped outlets.

[Lane Radiolanes]

I did somewhat the same at our transmitter sites (and our kitchen as well).
Split the outlets so each was on a seperate ckt, same phase, seperate ckts
and running a seperate neutral. Have seen some outlets split and having 240
vac across the two hot legs..

Lane


----- Original Message ----- 
From: "Glen Kippel" <glen.kippel at gmail.com>
To: "Broadcasters' Mailing List" <broadcast at radiolists.net>
Sent: Tuesday, August 15, 2006 9:30 PM
Subject: Re: [BC] Flipped outlets.


> On 8/15/06, nakayle at gmail.com <nakayle at gmail.com> wrote:
> >
> > All such switched outlets should be split in two (easily done by
removing
> > a
> > small jumper tab) so that one half is switched and the other is
> > continuous.
> > This way you have both.  This is such a useful improvement I think it
> > should
> > be required in the code but contractors oppose spending even the little
> > extra it would cost to run three-wire cable instead of two.
> >
> > -------------
>
>
>
> Five of the rooms in my home are wired exactly this way.
>
> GK
> _______________________________________________
>
> The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
> Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More!
> www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com
>