[BC] Knight Kit

[Stan Tacker]

My first transmitter was built around an 117L7M7GT.  It did everything but
answer the phone.  One tube rig.  1200 was the daytime frequency of choice.
I remember one day tuning up a short wave receiver and being scared to death
because of the unfiltered harmonics.  Plug it in the wrong way,
and...zzzzap.

-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Harold Hallikainen
Sent: Thursday, August 10, 2006 8:35 PM
To: Broadcasters' Mailing List
Subject: Re: [BC] Knight Kit


 > Yes, looking back it's amazing how dangerous they built electronic
 > equipment
 > in those days.  Connecting one side of the AC line to the chassis was a
 > very
 > common practice for cheap electronics in the 1950s and before.  Even the
 > simple precaution of using a polarized plug would have improved safety
 > greatly but manufactures didn't even do that.  I eventually leaned to use
 > a
 > neon-bulb to check line polarity every time I plugged something in.  But
 > it's a wonder we baby-boomer electronic experimenters ever made to
 > adulthood!   (-;
 >
 >  - Nat


As I recall, one side of the line went through the power switch to the
chassis. If the plug was in one way, the chassis was at zero volts (or
thereabouts, it was connected to neutral) when the unit was on, but at
120VAC when the unit was off. Reverse the plug and the chassis was at zero
volts when the unit was off, but at 120VAC when the unit was on. It also
two RCA phono plug inputs with the shells grounded, so your record player
ALSO got to have a hot chassis.

Harold


_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com