[BC] Radio Station Automation Systems

[Chuck Lakaytis]

We are doing exactly that with a Mediatouch system at KBBI-AM, Homer and
KDLL-FM, Kenai.  The stations are interconnected via fiber T-1 and are
programmed out of KBBI-AM.  Been doing that for almost four years.

Chuck Lakaytis
CML Broadcast
Anchorage, AK 


-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Black, Mike
Sent: Friday, August 04, 2006 4:21 AM
To: Broadcasters' Mailing List
Subject: RE: [BC] Radio Station Automation Systems

ENCO would be a good choice. They can do all that and more...

Mike Black
WEOS
Geneva, NY

-----Original Message-----
From: broadcast-bounces at radiolists.net
[mailto:broadcast-bounces at radiolists.net] On Behalf Of Wade Giddens
Sent: Friday, August 04, 2006 8:17 AM
To: broadcast at radiolists.net
Subject: [BC] Radio Station Automation Systems

I wold like your reccomendations on automation systems for the following

situation:  Two co-located stations that would simulcast a few hours a
day, 
but are otherwise separate, with satellite programming.

What would be a good system to allow the whole operation to run on a
unified 
system.  Traffic sends the logs to AM and to FM.  Production Room sends 
spots, weather, etc. to where it needs to go with ease, and either AM or
FM 
room could be used in Live mode.

The live mode needs to be easy to use.  For that matter, the whole setup

needs to be easy to use.



_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com

_______________________________________________

The BROADCAST [BC] list is sponsored by SystemsStore On-Line Sales
Cable-Connectors-Blocks-Racks-Wire Management-Test Gear-Tools and More! 
www.SystemsStore.com       Tel: 407-656-3719    Sales at SystemsStore.com